How to repurpose a long video into shorts
· 6 min read

There are two ways to turn a long video into shorts. You can clip it: find moments of 20 to 60 seconds that make sense on their own, trim them to start on a strong line, add a hook, reframe them to 9:16 and caption every word. Or you can re-say it: take the best idea from the long video and record a fresh 30 to 60 second version with a written hook. Clipping is faster. Re-saying works better when the long video's best ideas are spread out, wander, or depend on context the clip can't carry.
Most good repurposing uses both: clips for the moments that already stand alone, re-recordings for the ideas that don't.
What makes a moment clippable
A short has to work for someone who has never seen the long video. Before you cut anything, test each candidate moment against four questions:
- Does it stand alone? No "as I said earlier", no "he" without a name, no reference to a slide the viewer can't see.
- Does it have a question and an answer? A claim and its proof, a problem and its fix, a story and its turn. Half of one isn't a clip.
- Does it start strong? The first sentence has to work as a hook, or be cuttable down to one.
- Is it one idea? If the moment drifts into a second topic, end it before the drift.
Finding the moments
Get a transcript of the long video, then read it with a highlighter. Look for:
- Numbers. "We went from three customers to forty" is a clip waiting to happen.
- Stories with a turn. "We were about to shut down, and then..."
- Strong opinions. A clear "I think this is wrong, and here's why".
- Mistakes and lessons. "The thing I'd tell myself a year ago."
- Direct answers to questions. In interviews and Q&As, a good answer is often already a complete short.
Mark the start and end of each candidate in the transcript. Then read each one cold, as if you'd never heard the rest. If it doesn't make sense, it either needs a line of on-screen context or it's a re-say, not a clip.
Count the self-contained moments, not the minutes. A tight 20-minute interview can hold more good shorts than a rambling hour.
Clipping, step by step
1. Trim to the moment
Start on the first sentence that matters. Long-form speech warms up slowly ("So, yeah, I think the interesting thing about that is..."), and those warm-ups have to go. End on the payoff line, not on the speaker's next breath.
2. Give it a hook
The first two seconds of a clip are usually the weakest, because in the long video they followed something. Two fixes:
- A cold open. Put the payoff line, or the most striking sentence, at the very start, then cut back to where the moment begins.
- A question on screen. Six words or fewer of on-screen text that states what the clip answers: "Why they stopped the free plan."
25 hook formulas has shapes for the on-screen line.
3. Remove the long-form habits
Cut the ums, the false starts and the long pauses. They're normal in conversation and costly in a short. How to remove filler words covers where to cut.
4. Reframe for 9:16
Most long videos are horizontal. To make a vertical clip, crop a vertical slice around the speaker. With two people, either switch the crop to whoever is talking, or stack them, one above the other. Remember that a vertical slice of a 1080p frame is only about 608 pixels wide, so it will look softer than footage shot vertically; the guide to video shapes explains the trade-off.
5. Caption every word
Word-by-word captions, placed above the bottom fifth of the frame and clear of the buttons on the right. Fix names and numbers in the transcript first.
6. Check it cold
Watch the finished clip on your phone with the sound off, as someone who's never heard of the long video. If you'd scroll, the hook or the trim needs another pass.
When to re-say it instead
Some of the best ideas in a long video don't clip well:
- The idea is spread over ten minutes, with the setup early and the payoff much later.
- The speaker circles the point several times before making it.
- It depends on a slide, a demo or a chart that isn't in the shot.
- The long video is a wide shot, and a vertical crop loses the person.
For these, write a new short script from the idea: a hook of eight words or fewer, the idea told in five to eight lines, and an end that points to the full video. Then record it fresh, on camera or as a narrated faceless video. It takes longer than clipping, but you get a hook written for the first two seconds, not borrowed from the middle of a conversation. The method is the same as turning a blog post into a 60-second video.
| Clip | Re-say | |
|---|---|---|
| Speed | Fast, once you have a transcript | Slower: write, then record |
| The hook | Borrowed from the conversation | Written for the first two seconds |
| Context | Must already stand alone | You add what's needed |
| Picture | Often a crop of a wide shot | Shot for the shape |
| Feel | Raw, from the original moment | Tighter, made for the feed |
Posting them
- Point back to the long video. Name it in the last line or the on-screen text, and put the link wherever the platform allows.
- Give the series a name, so viewers recognise clips from the same show.
- Space them out. A batch of clips posted over a few weeks keeps a long video working long after its release.
How to do this in ThreeCut
ThreeCut doesn't cut clips out of a long upload; for that, use an editor with a transcript. What it does is the re-say route. Type the idea from the long video in one line, or paste the link to the episode page or show notes, and the writer drafts a 30 or 60 second script with a hook, a story and an end. Record it scene by scene with each line on screen, and it removes the ums and false starts and captions every word. Or make it a faceless video with an AI narrator. Stills or short clips from the long video can go in as your own photos and videos; they play under the narration or your voice. Start with one line.
Common questions
How do I turn a podcast episode into shorts?
Transcribe the episode, highlight moments of 20 to 60 seconds that make sense on their own, and trim each one to start on its strongest line. Reframe to 9:16 around the speaker, add word-by-word captions and a hook, and point back to the full episode in the last line.
How long should a clip from a long video be?
Usually 20 to 60 seconds: long enough for a question and its answer, short enough to stay on one idea. End on the payoff line rather than letting the speaker trail into the next topic.
How many shorts can I make from one long video?
As many as there are moments that stand alone, which depends on the video rather than its length. Read the transcript, test each candidate cold, and re-record the good ideas that don't clip cleanly.
Should I clip my long video or re-record the idea?
Clip when the moment already stands alone and starts strong. Re-record when the idea is spread out, depends on visuals that aren't in the shot, or needs a hook the conversation never gave it.