How many words is a 30 or 60 second video script?
· 6 min read

A 30-second video script is about 75 words, and a 60-second script about 150. That comes from a conversational speaking pace of roughly 150 words a minute, or 2.5 words a second. Treat those numbers as a ceiling rather than a target: aim about 10 percent under, so there is room for a pause before the line that matters and you never have to rush.
The rest of this guide gives the numbers for every common length, shows how to measure your own pace, and how to time a script scene by scene.
Word counts for every length
The ceiling below uses 2.6 words a second (156 a minute), the pace ThreeCut plans scripts at. The aim is 90 percent of the ceiling.
| Video length | Ceiling | Aim for | Scenes |
|---|---|---|---|
| 15 seconds | 39 words | 35 words | 3 to 4 |
| 30 seconds | 78 words | 70 words | 5 to 7 |
| 45 seconds | 117 words | 105 words | 6 to 9 |
| 60 seconds | 156 words | 140 words | 8 to 12 |
| 90 seconds | 234 words | 211 words | 9 to 13 |
| 2 minutes | 312 words | 281 words | 11 to 15 |
| 3 minutes | 468 words | 421 words | 14 to 18 |
The scene counts assume one thought per scene. Longer videos use longer scenes rather than endless short ones: a 30-second script can be built from one-line scenes, but a 3-minute script built that way has 40 of them and feels like a list.
Measure your own pace
The 150 words a minute figure is an average. Some people speak noticeably faster on camera, some slower, and an AI narrator reads at whatever pace its voice is set to. If you record yourself, two minutes of measuring gives you a number you can plan with:
- Take a paragraph of exactly 100 words that sounds like you. A section of an old script works well.
- Read it out loud the way you would on camera, at your normal energy, with a stopwatch running.
- Divide 100 by the seconds it took.
If 100 words took 42 seconds, your pace is 2.4 words a second. A 30-second video then holds 71 words at most, so aim for about 64. If it took 36 seconds, your pace is 2.8 words a second and you can aim for about 75.
Do it twice and use the slower result. On camera, most people slow down a little from their first read-through.
Time each scene
Once you know your pace, you can time a script before you record it. A simple formula:
Scene length in seconds = words ÷ 2.6 + 0.3
The 0.3 seconds is a short beat between scenes. Some examples:
| Words in the scene | Seconds |
|---|---|
| 7 | 3.0 |
| 12 | 4.9 |
| 20 | 8.0 |
| 30 | 11.8 |
Here is a 30-second script for a bike repair shop, timed this way:
| Part | Say | Words | Seconds |
|---|---|---|---|
| Hook | "Squeeze your back tyre. Does it give?" | 7 | 3.0 |
| Story | "If it does, you're riding on a soft tyre, and every hill feels steeper than it is." | 17 | 6.8 |
| Story | "The pressure you need is printed on the side of the tyre, usually as a range in PSI or bar." | 20 | 8.0 |
| Story | "Pump it to the middle of that range, then squeeze it again so you know what right feels like." | 19 | 7.6 |
| End | "Firm tyre, easier ride. Check yours before Saturday's ride." | 9 | 3.8 |
| Total | 72 | 29.2 |
It lands under 30 seconds with a little room to spare, and the hook takes 3 seconds, which is about as long as a hook should take. Eight words or fewer is a good limit for the first line. How to write a video script covers what goes in each part.
What makes a script longer than its word count
Word count is the main thing, but four other things add time:
- Numbers. Count them as you will say them. "£1,250" is "twelve hundred and fifty pounds", five words. "1987" is "nineteen eighty-seven". Write numbers in the script the way you will speak them, then count.
- Pauses. Every deliberate pause costs a third of a second to a second. Plan one, before the most important line, and let the edit remove the rest.
- Hard words. Jargon, long names and words you rarely say slow you down. If a line has three of them, it will run long.
- Lists. People slow down and stress each item in a list. Three items in a row take longer than the same number of words in a sentence.
If the script runs long, cut words, not speed
The worst fix for a long script is to read it faster. Viewers can hear the hurry, and fast delivery is where stumbles and false starts come from (see how to remove filler words for cleaning those up afterwards). Cut words instead, in this order:
- Signposts. "Here's the thing", "So basically", "What I want to tell you is". Start on the content.
- Repeated points. If two scenes make the same point, keep the more specific one.
- Second sentences. Most scenes need one sentence. Cut the one that explains the first.
- Anything the screen already says. If the on-screen text shows "£8", the voice doesn't need to say the price twice.
- The recap. The viewer heard the video seconds ago.
If the script runs short, don't pad it. Add a concrete example, a number or a moment the viewer will recognise, or pick a shorter length.
How to do this in ThreeCut
ThreeCut's writer plans every draft at 2.6 words a second and treats the result as a hard ceiling: 78 spoken words for 30 seconds, 156 for 60, up to 546 for three and a half minutes. It aims about 10 percent under, splits the script into the scene counts above, and times each scene from its own words. If a first draft runs long or short, it rewrites once to fit. In the editor, every scene shows its word count and how long it takes to read, and it warns you when a scene's words need more time than the scene has. Start with one line.
Common questions
How many words is a 30-second script?
About 70 to 78 words at a conversational pace. Aim for around 70, so there's room for one pause and you don't have to rush the last line.
How many words is a 2-minute video script?
About 280 to 310 words. For anything over a minute, split it into scenes of one or two sentences each, and give the story a turn or a small reveal every 30 seconds or so.
How long does it take to say 100 words?
About 38 to 40 seconds at a conversational pace of 2.5 to 2.6 words a second. Fast speakers take closer to 33 seconds; slow, deliberate speakers 45 or more.
Should I talk faster to fit more words in?
No. Cut words instead. Rushed delivery sounds anxious and causes more stumbles, and every stumble you cut out later makes the edit choppier.